Videoswitch Vi-POSCON - Manual (Page 26)

Videoswitch 26 Pos601a.doc
Vi-POSCON Installation Guide
Highlight and click Exit to save the setting. The ALARM MENU reappears displaying the start time.
7.9.9 Setting the End Time
Use this option to set the end time of a timed alarm's active period. The default setting is 23:59.
Highlight and click End Time on the ALARM MENU. The SET TIME menu appears.
Highlight and click the item (hour, minute) to set. Each click increases (increments) or decreases
(decrements) the item by one unit.
Highlight and click Exit to save the setting. The ALARM MENU reappears displaying the end time.
7.10 Setting the Channel Attributes
This menu lets you configure the attributes for each of the four Data Input channels. To access the
menu, highlight and click Channel Attributes on the SERVICE MENU. The CHANNEL ATTRIBUTES
menu appears.
7.10.1 Setting the Current Channel
Use this option to select the Data Channel to configure.
Highlight and click Current Channel on the CHANNEL MENU. The CHANNEL menu appears.
Highlight and click the channel you want to configure. The CHANNEL MENU reappears displaying the
selected channel.
7.10.2 Setting the Baud Rate
This setting configures the baud rate of the Vi-POSCON controller to that of the printer interface. The
default setting is 9600 Baud. Perform the following steps to set the baud rate:
Highlight and click Baud Rate on the CHANNEL MENU. The BAUD RATE menu appears.
Increment Hour
Decrement Hour
Increment Minute
Decrement Minute
Exit
SET TIME
Current Channel : 1
Baud Rate : 9600
Line Filtering : Unfiltered
Register Identity : Reg 1
Text Colour : White
Text Window Border : Line Border
Text Window Position : X=03, Y=12
Text Window Size : H=08, W=35
Return to Service Menu
CHANNEL MENU
Channel 1
Channel 2
Channel 3
Channel 4
CHANNEL
1200 Baud
2400 Baud
4800 Baud
9600 Baud
BAUD RATE