Installation – Videoswitch VT User Manual
Page 4
Advertising
VT Series 2
User Manual
Page 4
Videoswitch
VT601c.doc
2.
Installation
The transmitters may be connected to the receivers in a number of different configurations depending on
how the telemetry control is to be transmitted to the receivers. These configurations are described below.
2.1 Coax Telemetry
Coax telemetry is the simplest and is suitable where there is a direct coax link between each receiver and
the transmitter (earth loop isolating transformers may be used in the coax lines if there are required).
Advertising