Zoo Med Digital UV Radiometer - UVB User Manual
Zoo Med For pets
This meter allows you to track the decrease in output of your UVB
lamps over time. Simply point the round sensor on the top of the unit
at the UVB source, hold down the button and read the LCD screen
(UVB level is displayed in microwatts per square centimeter).
Remember that readings will vary with distance, so make all
measurements from the same distance (12” for example). A 9-volt
battery is included already installed in the unit. Eventually the battery
indicator "Batt" will come on, indicating need for replacement of
battery. Always replace battery when indicator comes on in order to
maintain meter accuracy.
•
Wear eye protection when checking UV lamps (e.g.: UV-block
eyewear).
•
Allow lamps to warm-up prior to taking readings (at least 5 min).
•
Do not use meter to compare different type lamps, due to their
different spectral power distributions. Although higher output
lamps will read higher than low output lamps, the readings are
relative rather than absolute.
•
Do not subject the meter to extremes in temperature, humidity,
shock or dust.
•
Use a dry, soft cloth to clean the instrument. Keep sensor free
of oil, dirt, etc.
•
Keep sensor from light when not in use.