Avaya S8300 - Manual (Page 485)

Install the S8300
Issue 9.1 June 2006 485
Configure Ethernet Interfaces Screen
8. Use your planning forms to complete the fields for the:
● Ethernet 1: Control Network
- IP Address server1 (hostname) assigned to the S8300 Media Server. Check your
planning forms.
- Gateway with the IP address of the default gateway of the subnet.
- Subnet mask with the value of the subnet mask of the hosting subnet.
- Speed which should be set to Auto Sense.
● Integrated Messaging (if messaging software was installed earlier)
- IP Address server1 (hostname) assigned to Integrated Messaging. Check your
planning forms.
!
CAUTION:
CAUTION:
Do not guess on the addresses on this screen. If you enter the wrong addresses,
Integrated Messaging will not be installed, service will be disrupted across the
customer’s network and may be difficult to correct.
9. Click Continue.
The Configure Local Survivable Processor screen appears.