Avaya S8300 - Manual (Page 492)

Manual installation of a new G700 with an S8300
492 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
22. If you have a file named keys.install to allow the media server to communicate with the
NTS, select Install keys from var/home/ftp/keys.install.
If you do not have a keys.install file, select Do not install a new keys file.
Note:
Note:
If you have a keys.install file, upload or create it now, if possible. See Providing
the keys.install File (If Necessary) on page 494. If you upload the keys file later,
you have to run the Web Interface Configure Server wizard again to have the
system recognize it.
Click Continue.
23. At the next screen, Set Modem Interface, you can set up the Modem Interface IP Address
for Avaya-provided service.
Set Modem Interface Screen
Note:
Note:
The Modem IP Address for the Avaya INADS alarming is assigned by the ART
tool. You should have obtained this address when you performed
Running the
Automatic Registration Tool (ART) for the INADS IP address, if necessary on
page 467.
Click Continue.
The next Warning screen indicates that the data entry process has concluded and that the
system is ready to be configured.