Audiovox PAV6D - Manual (Page 33)

30
There are two types of monitors. The ordinary monitor has 4:3 horizontal/vertical image
ratio, while the wide monitor has 16:9 image ratio. Any of the following 3 types can be used
for some DVDs, which may store multi-image ratios. Set the image ratio according to your
monitor type.
4:3 Letter Box
This can be selected for an ordinary monitor. If a wide image DVD of 16:9 image ratio is
played, the vertical length will be compressed with black bands on upper and lower parts
of screen.
4:3 Pan & Scan
This can be selected for an ordinary monitor. If a wide image DVD of 16:9 image ratio
is played, some of the left and right parts of the screen will be cut.
16:9 Wide screen
When a wide image DVD of 16:9 ratio is played, it can be played full-screen on a wide
monitor. To have the image displayed full-screen, set the monitor at Full or
an equivalent mode. Refer to the manual of your monitor for details.
Run steps 1 and 2 for Basic operation to change the setup and to display the setup
screen.
Use Up/ Dn cursor button to select SETUP and press Enter button.
The setup screen will be displayed.
TV screen change1(vertical/ horizontal image ratio)
Setup button