Audiovox PAV6D User Manual
Page 36
Advertising
33
Analog output is the default for audio output.
If you want to change to optical output, set SPDIF/RAW (or PCM) for the audio output.
Select MAIN PAGE and then EXIT SETUP from Setup menu. Press Play button to
change to optical output.
About RAW and PCM
RAW : Selectable when Dolby digital decoder is connected with the audio. When
Dolby digital format (signal) audio is played, it will be output without its
change.
PCM : Selectable when Dolby digital decoder is not connected with the audio.
Dolby digital format (signal) audio will be changed to linear PCM before
output.
Advertising