Audiovox PAV6D - Manual (Page 34)

31
Use Up/Down cursor button to set an image ratio(4:3 Letter Box, 4:3 Pan & Scan, 16:9
Wide Screen) and press Enter button. Then, the main setup screen will be displayed
again.
Note.
When you have selected an image ratio which is not stored in the disc, any image ratio
stored in the disc may be used during play. Some discs include only a single image ratio.
If you setup 16:9 WideScreen for an ordinary monitor, the image may be distorted.
For an ordinary monitor, use the setup 4:3 Letter Box or 4:3 Pan & Scan.
If a wide monitor is set at Full or an equivalent mode and the DVD Changer is set for
4:3 Letter Box or 4:3 Pan & Scan , the image may not look natural. If you want to use
a wide monitor to view 4:3 Letter Box or 4:3 Pan & Scan image, set the monitor to 4:3
image ratio.
Use Up/ Dn cursor button to setup a TV signal format (MULTI, NTSC, PAL) and press
the Enter button. Then, the main setup screen will be displayed again.
TV screen change2 (vertical /horizontal image ratio)