AT&T 882 - Manual (Page 20)

Operation
16
AT&T 882 Manual
Making a Call
You can make a call from the dial pad or by pressing Dial on
the directory, DiLog or InLog displays. Pages 21 and 22
explain in detail how to make a Redial or ADial call.
Sections 3 and 5 explain how to dial numbers from the
directories or InLog.
When you make a call, the ÒPreferred LineÓ is always selected
when both lines are free. If you did not change this setting in
Set-Up, the preferred line will be the line connected to
Line 1 on the back of the phone.
Making a Call from
the Dial Pad 1 Lift handset or press SPEAKER.
Override Automatic Line Selection:
Press LINE 1 or LINE 2. Pressing the line button turns on
the speakerphone. You can then lift the handset if you
wish.
2 Dial the number from the dial pad. You can insert a hyphen,
pause or wait by pressing the space bar on the alpha pad once
for a hyphen, twice for a 3-second pause, and 3 times for a 30
second wait.
Making a Call
From a Directory,
DiLog or InLog Using Dial
1 Locate the display where the number you want to dial
appears.
2 Use the or buttons to highlight the number.
3 Press the soft key below Dial. The label changes to ADial.
The speakerphone indicator comes ON and the phone
begins to dial the number after a few seconds.
2