AT&T 882 - Manual (Page 21)

Operation
17
AT&T 882 Manual
Using ADial
This feature repeatedly dials a highlighted phone number, if
busy. See page 21 for further information on ADial.
1
Do not lift the handset or press SPEAKER.
2 Locate the display where the number you want
to dial appears.
3 Use the or buttons to highlight the number.
4 Once the number is highlighted, press the soft key below
Dial. The label changes to ADial.
5 Immediately press the soft key below Adial .
Answering a Call
When you answer a call, the phone automatically selects the
ringing line if line choice is Automatic (see page 46).
Each line has a different ringer tone to signal an incoming call.
The yellow-green
LINE IN USE indicator flashes when that line
receives a call. The red LINE IN USE indicator is ON if the
line is in use at this phone or another phone.
•
Lift handset or press SPEAKER.
If Line choice is AUTO the ringing line will be answered.
If Line choice is MANUAL, you must press the line button to
answer the non-preferred line.
NOTE: If you subscribe to Caller Identification
Service, Call ID information is sent to the phone
between the first and second ring. See pp 38-41 for
Caller ID information.
2