AT&T 882 - Manual (Page 49)

Appendices
45
AT&T 882 Manual
Button Tone
If ON, a tone sounds every time a button is pressed.
1 Highlight “Button Tone”.
2 Press SELECT to alternate between ON and OFF.
3 Press to move to next item or press the soft key below
Exit when you are done changing all settings.
Removal Confirm
If ON, prevents accidental erasure of information. When you
remove information an extra display appears requiring you to
press a YES or NO soft key.
When removal confirmation is OFF, removal confirmation is
only required to confirm a removal of a directory or to remove
all of the Incoming Call Log.
1 Highlight “Removal confirm”.
2 Press SELECT to alternate between ON and OFF.
3 Press to move to next item or press the soft key below
Exit when you are done changing all settings.
Preferred Line
The preferred line is the line selected when both lines are free.
If you do not change this setting, the preferred line will be the
line connected to Line 1 on the back of the phone.
1 Highlight “Preferred Line”.
2 Press SELECT to alternate between Line 1 and Line 2.
3 Press to move to next item or press the soft key below
Exit when you are done changing all settings.
6