Electrix Filter Factory User Manual
Page 13
SET UPS
PERFORMANCE GUIDE
Post Mixer
T
his is a simple setup for stereo processing of your entire mix. You’ll want to use this setup
only after you have explored all the sonic possibilities of FilterFactory because cueing is not
possible. The cueing limitation can be minimized by bringing in the effect gradually with
FilterFactory’s mix control and doing any adjustments from there.
The 1/4” output jacks have servo driver circuits which are capable of driving longer cables to your
power amp.
Also, this setup comes with a warning: WATCH THAT RESONANCE CONTROL! Like any true analog
filter, FilterFactory is capable of generating ear- and PA-shredding peaks when you increase the
resonance control beyond halfway. Have we made this point enough?
3.1
Line in
Line Out
to Crossover/Power Amp
Phono in