Repeater-2 – Kenwood RC-D710 User Manual
Page 9
REPEATER-2
■ Selecting a Tone Frequency
To select the tone frequency required to access your
desired repeater:
1 Turn the Tone function ON.
2 Press
[F], [T.SEL].
• The current tone frequency appears on the display.
The default frequency is 88.5 Hz.
3 Rotate
the
Tuning control to select your desired
frequency.
• To exit the tone frequency selection, press [ESC].
4 Press any key other than the Tuning control and
[ESC] to set the selected frequency.
Note: If you have set up a Memory channel with a tone setting,
simply recall the Memory channel instead of setting up the tone
frequency every time.
No.
Frequency
(Hz)
No.
Frequency
(Hz)
No.
Frequency
(Hz)
01
67.0
16
110.9
31
186.2
02
69.3
17
114.8
32
192.8
03
71.9
18
118.8
33
203.5
04
74.4
19
123.0
34
206.5
05
77.0
20
127.3
35
210.7
06
79.7
21
131.8
36
218.1
07
82.5
22
136.5
37
225.7
08
85.4
23
141.3
38
229.1
09
88.5
24
146.2
39
233.6
10
91.5
25
151.4
40
241.8
11
94.8
26
156.7
41
250.3
12
97.4
27
162.2
42
254.1
13
100.0
28
167.9
14
103.5
29
173.8
15
107.2
30
179.9
■ Automatic Repeater Offset (K and E Types Only)
This function automatically selects an offset direction
and activates the Tone function, according to the
frequency that you have selected. To obtain an up-
to-date band plan for repeater offset direction, contact
your national Amateur Radio association.
1 Enter Menu mode and access Menu 401.
2 Set the ARO to ON.
3 Press
[BAND SEL A] to select the A band.
4 Press
[VFO] to select VFO mode.
5 Rotate
the
Tuning control to select your desired
frequency.
6 Press
[PTT] to start a call.
• You will be transmitting on an offset frequency value
determined from your offset setting value and an
offset direction depending on your selected frequency.
Refer to the settings below for offset directions:
K
Type:
Under 145.100 MHz:
No offset (Simplex
operation)
145.100 ~ 145.499 MHz: Minus (–) offset
145.500 ~ 145.599 MHz: No offset (Simplex
operation)
146.000 ~ 146.399 MHz: Plus (+) offset
146.400 ~ 146.599 MHz: No offset (Simplex
operation)
146.600 ~ 146.999 MHz: Minus (–) offset
147.000 ~ 147.399 MHz: Plus (+) offset
147.400 ~ 147.599 MHz: No offset (Simplex
operation)
147.600 ~ 147.999 MHz: Minus (–) offset
148.000 MHz and higher: No offset (Simplex
operation)
E
Type:
Under 145.000 MHz:
No offset (Simplex
operation)
145.600 ~ 145.799 MHz: Minus (–) offset
145.800 MHz and higher: No offset (Simplex
operation)