Kenwood DNX4280BT - Manual (Page 47)

46 46
Return to the Top page
Radio, TV
TV Basic Operation
Most functions can be controlled from the source control screen and TV screen.
NOTE
• Set the remote controller mode switch to TV mode before starting operation, see Switching the operation mode
(P.87) .
• You can only operate TV with the optional accessory TV tuner connected.
For analog TV, KTC-V301E/V300E/V500E is necessary.
For digital TV, KTC-D500E or KTC-D600E is necessary.
• During playback, press the <MENU> button to display the source control screen.
1
2 2 3 3 4 7
5
1
Simple Control screen List Control screen
6
1 Information display/Control switching area
Displays the following information.
• [TV1], [TV2] (analog TV only): Band display
• Preset # (analog TV only): Preset number
• Group (analog TV only): TV area group
• #ch: Channel display
Touching this area switches between the Simple Control and List Control screen.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see
Multi function menu (P.47) .
3 Preset key (analog TV only)/Multi function menu
Recalls the memorized channel. When touched for 2 seconds, store the current receiving station or
channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
Multi function menu (P.47) .
4 Sub function key
Touch to display “Sub function menu” (6 in this table).
5 Preset list (analog TV only)
Displays the list of preset channels.
6 Sub function menu
The following function can be performed by using keys in this area.
• Hide all keys: Touch [
].
7 List switching key (analog TV only)
Touch to switch between the preset list and the information list.