Kenwood DNX4280BT - Manual (Page 51)

50 50
Return to the Top page
Radio, TV
Traffic Information (FM tuner only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio Data
System that includes the TI information.
1
Touch [ ] in the control screen.
The multi function menu appears.
2
Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
Tuner Setup
You can set tuner related parameters.
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.
5
Set each item as follows.
NEWS
Sets a news bulletin interrupt time. Default is
“OFF.”
AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON.”
Regional
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “ON.”
Auto TP Seek
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON.”
Language Select
Selects a display language for the PTY function.