Kenwood DNX4280BT - Manual (Page 81)

80 80
Return to the Top page
Audio Setting Up
Speaker location setup
1
In the Car Type screen, touch
[Location].
Speaker Location screen appears.
2
Select the speaker locations using
[ 3].
Front Speaker
Select the location from “Door”/ “On Dash”/
“Under Dash.”
Rear Speaker
Select the location from “Door”/“Rear Deck”,
“2nd Row”/“3rd Row” (Minivan, Passenger Van).
Car type adjust
You can manually set the sound output
timing of each channel.
1
In the Car Type screen, touch [Adjust].
Car Type Adjust screen appears.
2
Touch the speaker you wish to adjust
and set a delay time using [ 2] and [3]
or slider bar.
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
• The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1
Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
50cm
80cm
150cm
+70cm
+0cm
+100cm