Kenwood DNX4280BT - Manual (Page 8)

7
Return to the Top page
Basic Operations
Number Name Motion
1
fi (Reset) • If the unit or the connected unit fails to operate properly, the unit
returns to factory settings when this button is pressed (P.92) .
2
ATT • Switches attenuation of the volume on/off.
• Pressing for 1 second turns the screen off.
3
∞, 5 (Vol) Adjusts volume.
Holding down a key turns up the volume in series up to 25. For more than
25, pressing the key turns up the volume one by one.
4
AUD • Displays Graphic Equalizer screen (P.82) .*
• Pressing for 1 second switches camera view display on/off.
5
NAV • Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• When the power off, turns the power on.
6
MENU • Displays the Top Menu screen (P.17) .
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
7
TEL • Displays the Hands Free screen (P.52) .
• Pressing for 1 second displays the Screen Control screen.
• When the power off, turns the power on.
8
0 (Eject) • Ejects the disc.
• Pressing for 1 second opens the panel to the location of the disc slot.
When the panel is opened, perssing for 1 second closes the panel and
pressing for 3 seconds ejects the disc forcibly.
• When the panel is closed, pressing for 3 seconds fully opens the panel to
the location of the SD card slot.
9
Remote
Sensor • Receives the remote control signal. You can enable or disable this
feature by Remote Sensor (P.67) .
• If [Remote Sensor] is set to off, the remote control of TV reception is
rejected.
10
Disc insert
slot A slot to insert a disc media.
11
SD card slot A slot to insert an SD card. The card is used for upgrading the map.
For how to upgrade the map, refer to the instruction manual of the
navigation system.
Also, you can play audio/visual file in the card.
* The display may not switch to the Graphic Equalizer screen in some conditions.