Kenwood KDC-DAB41U - Manual (Page 31)

English
31
■ When only two speakers are being
connected to the system, connect the
connectors either to both the front output
terminals or to both the rear output
terminals (do not mix front and rear).
■ Mounting and wiring this product requires
skills and experience. For safety’s sake, leave
this work to professionals.
If you experience problems during
installation, consult your Kenwood dealer.
About Bluetooth unit (Optional)
■ This unit supports KCA-BT300 or KCA-BT200.
■ Plugging a KCA-BT300/ KCA-BT200 into this
unit will enable BT audio.
– Selecting Bluetooth Audio source
Press SRC to select the “BT AUDIO EXT”.
– To pause/resumes playback, press number
button 6 ( 38).
– To select track, press 4 or ¢.
■ Set the Type Switch on KCA-BT300/ KCA-
BT200 as follows:
1: OFF, 2: OFF, 3: OFF
¤ CAUTION
Install this unit in the console of your
vehicle.
Do not touch the metal part of this unit
during and shortly after the use of the
unit. Metal part such as the heat sink and
enclosure become hot.
B64-4833-00_01_E.indb 31 B64-4833-00_01_E.indb 31 11/03/07 11:09 11/03/07 11:09