12 disposal of waste materials, 13 troubleshooting, 12 disposal of waste materials 13 troubleshooting – Videotec ULISSE COMPACT HD User Manual

Page 30

Advertising
background image

EN - English - I

nstruc

tions manual

30

MNVCUCHD_1405_EN

12 Disposal of waste
materials

This symbol mark and recycle system

are applied only to EU countries and not

applied to the countries in the other area of

the world.

Your product is designed and manufactured with

high quality materials and components which can be

recycled and reused.
This symbol means that electrical and electronic

equipment, at their end-of-life, should be disposed of

separately from your household waste.
Please dispose of this equipment at your local

Community waste collection or Recycling centre.
In the European Union there are separate collection

systems for used electrical and electronic products.

13 Troubleshooting

Ask for assistance from skilled personnel if:
• The unit is damaged after being dropped;
• There is noticeable deterioration in performance

of the unit.

• The unit does not work properly, even though

all the instructions in this handbook have been

followed.

PROBLEM

The product does not go on.

CAUSE

Wiring error, blown fuse.

SOLUTION

Make sure the connections are

correct. Check the continuity of the

fuses and if one is blown replace it

using the size as indicated in the

table. If blown fuses are a frequent

problem, contact your authorised

service centre.

PROBLEM

The preset position settings do

not correspond to the shooting

area.

CAUSE

Loss of absolute position reference

point.

SOLUTION

Reset the equipment by switching

off and on again.

Advertising