Videotec MAXIMUS WASEX - Manual (Page 10)

EN - English - I
nstruc
tions manual
8
Turn the safety valve to release any residual pressure
in the tank.
Fig. 14
Undo the top body of the pump (01) by turning it
anti-clockwise and removing it. Fill the tank (02) (10l
max) Re-install the top body of the pump.
01
02
Fig. 15
Pressurize the tank by pumping the top body of the
pump up to a pressure of 3.5Bar. Turn the handle on
the body of the pump to its safety position.
Fig. 16
Connect the delivery pipe (01), passing it through the
seal ring (02).
01
02
Fig. 17
Insert the guard and tighten the safety screw.
Fig. 18
6.1.4 Washer installation (pan & tilt)
Fasten the bracket (01) onto the body of the pan & tilt
with the metal clamp (02) provided.
02
01
Fig. 19