Videotec MAXIMUS WASEX - Manual (Page 11)

Instruc
tions manual - English - EN
9
Shorten the washer pipe (01) as needed. Unscrew the
nut (02) and slide it along the pipe. Insert the end of
the pipe into the ogive (03).
03
01
02
Fig. 20
Lock the nut to the coupling.
Fig. 21
Attach the pipe to the washer support using the
bracket (01), the screws (02) and the washers (03)
supplied. Connect the supply pipe (04).
02
03
01
04
Fig. 22
To calibrate the jet direct the nozzle towards the glass
of the housing.
Fig. 23
To start the washer, refer to the pan & tilt manual.
6.1.4.1 Installation examples
Fig. 24
Fig. 25
Fig. 26 Pipe attached to the wall with a plate.