MagTek MCP - Manual (Page 48)

MCP Serial Transport Protocol
42
Each model device shall use a different product identifier. The product identifier can usually be
found in the device’s technical reference manual.
All devices shall contain a manufacturer string descriptor with a value of “MagTek”.
All devices shall contain a product string descriptor with a value that contains the model of the
device. The product string value can usually be found in the device’s technical reference
manual.
Some devices may contain a programmable serial number string descriptor. This serial number
could be used to uniquely identify multiple devices with the same model number in the same
system if their serial numbers are programmed to unique values. If this option is present, its
functionality will usually be described in the device’s command reference manual.