MagTek USB KB INTELLIHEAD - Manual (Page 10)

USB Keyboard Emulation Swipe Reader
2
HARDWARE CONFIGURATIONS
The hardware configurations are as shown in the table below. Drawings of each model are
included in Appendix C.
Part
Number
Description
Cable Length and
Connector Type
Rail or Housing
21030007 USB KB IntelliHead 125mm, 5 pin Molex Butterfly Spring
21030008 USB KB IntelliHead 275mm,USB-A Butterfly Spring
21030016 USB KB IntelliHead 125mm, 5 pin Molex Accordion Spring
21040132 USB KB IntelliHead swipe reader 6 in, USB-A 100mm Black Body
21040133 USB KB IntelliHead swipe reader 6 ft, USB-A 100mm Black Body
21040137 USB KB IntelliHead swipe reader 6 in, USB-A Right Angle 100mm Black Body
21045088 USB KB IntelliHead open rail 125mm, 5 pin Molex 90mm Black rail
21046004 USB KB IntelliHead 60mm Slim rail 125mm, 5 pin Molex 60mm Black slim rail
21047012 USB KB IntelliHead 90mm slim rail 125mm, 5 pin Molex 90mm Black slim rail
ACCESSORIES
The accessories are as follows:
Part Number Description
21042806 USB MSR Demo Program with Source Code (disk)
21051534 Test Cable to convert from IntelliHead to USB-A (6 ft)
99510026 USB MSR Demo Program with Source Code (WEB)
REFERENCE DOCUMENTS
MagTek Magnetic Card Reader Design Kit Technical Specification (99821002)
MagTek USB HID IntelliHead for Swipe Readers, Technical Reference Manual (99875320)
Axelson, Jan. USB Complete, Everything You Need to Develop Custom USB Peripherals, 1999.
Lakeview Research, 2209 Winnebago St., Madison WI 53704, 396pp., http://www.lvr.com
USB Human Interface Device (HID) Class Specification Version 1.1
Universal Serial Bus (USB): HID Usage Tables Version 1.12 (1/21/2005)
USB (Universal Serial Bus) Specification, Version 1.1, Copyright
©
1998 by Compaq Computer
Corporation, Intel Corporation, Microsoft Corporation, NEC Corporation
USB Implementers Forum, Inc., www.usb.org