AT&T E2562 - Manual (Page 36)

34
Appendix
Display screen status icons
Status icons
1-8
Line in use (line number shown in phone icon)
Handset using answering system (handset number followed by “T”)
Phone in use (intercom call); flashes when handset is being paged
Battery power level (see below)
Ringer off
Answering system is answering an incoming call
Handset identification number
M Microphone is muted
H Call is on hold
E Enhanced mode is activated
P No AC power
R Handset is not yet registered, or searching for base
Battery power levels
Battery fully charged
Approximately half power remaining
Battery power is low; should be recharged soon
(flashing) Battery power is very low and must be recharged
HANDSET 1
RDL MEM MENU
1T
BASE
RDL MEM MENU
ATT-2562CIB-d4.qxd 12/29/2003 6:26 PM Page 34