AT&T E2562 - Manual (Page 37)

35
Appendix
“Beep”
(Single beep) Handset registration or programming
command successfully completed.
“Beeeeeeeeep”
(1 long beep) The handset is out of range. Move closer
to the base.
“Beeeeeeeeep”
(1 long beep) Error tone (current operation has been
unsuccessful; try again).
Alert tones and indicator lights
“Beep-Beep-Beep-Beep-Beep”
(5 quick beeps) Handset battery is low. Place handset in
base to charge the battery.
Alert tones
Indicator lights
MUTE
On when base
microphone is muted.
HEADSET
On when headset is
in use
SPEAKERPHONE
On when speakerphone
is in use
ON/OFF
Steady: Both mailboxes on
Flashing: One mailbox turned off
Off: Both mailboxes turned off
L1/L/2
Steady: Line in use
Slow flash: Line on hold
Quick flash: Line ringing MAILBOX LINE 1/2
Steady: Old messages
Flashing: New messages SPARE BATTERY
Steady: Spare battery is charging
Flashing: AC power is off. Spare
battery is in use.
Handset light flashes to
announce new messages
Button lights when speaker-
phone is in use
ATT-2562CIB-d4.qxd 12/29/2003 6:26 PM Page 35