Ss jis type 2 property, Es jis type 2 property – MagTek USB KB SURESWIPE & USB KB SWIPE READER User Manual
Page 44
USB Keyboard Emulation Swipe Reader
36
SS JIS TYPE 2 PROPERTY
Property ID:
0x1B
Property Type:
Byte
Length:
1 byte
Get Property:
Yes
Set Property:
Yes
Default Value:
0x7F ‘DEL’
Description:
This character is sent as the start sentinel for cards that are encoded in the JIS
type 2 format. If the value is in the range 0 – 127 then the equivalent ASCII
character will be sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
Note
This property only applies to swipe readers, not the SureSwipe readers.
ES JIS TYPE 2 PROPERTY
Property ID:
0x1C
Property Type:
Byte
Length:
1 byte
Get Property:
Yes
Set Property:
Yes
Default Value:
0x7F ‘DEL’
Description:
This character is sent as the end sentinel for cards that are encoded in the JIS
type 2 format. If the value is in the range 0 – 127 then the equivalent ASCII
character will be sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
Note
This property only applies to swipe readers, not the SureSwipe readers.