MagTek MICR Plus RS-232 - Manual (Page 59)

Appendix C. Troubleshooting Guide
51
16
No problem found
The MICR Plus is operating properly. If you have additional concerns or requirements please
contact your MagTek representative.
17
Read Insta-Change check
Read Insta-Change check with the appropriate settings. Return to step 00. If condition persists,
continue to step 18.
18
Return MICR Plus to MagTek
The MICR Plus has a problem that needs further analysis, testing, and possibly repair. Please
contact the MagTek Help Desk at (651) 415-6800, and make arrangements to send the unit back
to MagTek. Include a detailed description of the problem.
↑
Motor Sensor Data Sensor
→
Figure C-1. Sensor Location