Wagner ProCoat 9195 - Manual (Page 21)

English 21
Cleaning the
Sureflo Valve
Start You will need:
• Wrench
Cleaning or servicing the Sureflo Valve
may be required if the unit has priming
problems. Priming problems may be
prevented by properly cleaning the sprayer
and following the long-term storage steps.
If priming problems persist, you may need
to replace the Sureflo Valve assembly. Call
Technical Service (1-800-880-0993) to order
new Sureflo™ valve assembly.
1. Remove the suction tube.
3. Lubricate the O-ring on the Sureflo Valve (b) with
petroleum jelly.
Replace Sureflo Valve assembly by screwing it into
the sprayer. Tighten with the wrench.
2. Unscrew the Sureflo Valve assembly (a) from the
sprayer. Visually inspect the inside and outside
of the Sureflo Valve assembly. Clean any paint
residue with the appropriate cleaning solution.
4. Replace suction tube and hand-tighten.
1
(a)
2
(b)
3 4