Wagner ProCoat 9195 - Manual (Page 4)

English 4
What’s in
the box?*
Start
*Certain parts of the sprayer will not be
assembled out of the box. Be sure to read
Assembly instructions, page 6.
Notice:
This pump is available in a stand model
(9145) and cart models (9155 shown right,
9175 and 9195). all information given for
the stand model applies to the cart model
except where indicated.
Some of the graphics in this manual may not
exactly match your sprayer and spray gun.
all information and instructions given in this
manual applies to all models except where
noted.
The type of spray gun and length of spray
hose included depends upon the pump
model you have. Refer to the chart below
for details.
Pump model gun model Hose Length
9145 GS-07 25 ft.
9155 GS-07 35 ft.
9175 GS-08 50 ft.
9195 GS-08 50 ft.
Spray Gun assembly Sprayer assembly
Versatip Spray tip assembly
Spray Hose assembly
GS-07 GS-08
Sureflo™ valve
Pail bracket*
Suction tube
Material
return tube
Inlet filter
* Cart models only
AutoOiler™ cap*
Pressure control dial
(reverse side)
Hose wrap*
Spray hose port
(reverse side)
Pump cleaning
adapter
(reverse side)
AutoOiler™
button*
PRIME/SPRAY
knob
Cord wrap*
ON/OFF switch
Spray
guard
Spray tip