Ashcroft GC35 - Pressure Sensor - Manual

Quick Start Function Instructions for
GC35 Heavy Duty Digital Pressure Sensor
Version 1.0 6/06/09
(See Complete I&M Manual for Further Detail)
© 2010 Ashcroft Inc., 250 East Main St., Stratford, CT 06614-5145, USA, Tel: 203-378-8281, Fax: 203-385-0499,
www.ashcroft.com All sales subject to standard terms and conditions of sale.
8/10 I&M011-10182-GC35 Ver. 6.03 Rev. B
ᕥ Collector/switch 1
LED operation
indicator (OUT 2)
ᕡ 4 Digit, 8mm
LED display
ᕤ UP key ᕣ DOWN key
ᕢ MODE key
ᕦ Setting mode
LED operation
indicator (SET)
ᕥ Collector/switch 1
LED operation indicator
(OUT 1)
Function
Display of pressure, linear scaling
Change to/from switch setting modes and
product’s settings
Change selections / decrease set values
Change selections / increase set values
Indicates switch state. LED indicator will be ON
when switch is activated
Identifies that the switch setting has been
performed
Designation
ᕡ
Measurement Display
ᕢ
Mode Key MODE
ᕣ
Down Key #
ᕤ
Up Key $
ᕥ
Collector / Switch LED
Operation Indicator
(OUT1)/(OUT2)
ᕦ
Switch Setting Mode LED
Operation Indicator (SET)
DISPLAY OVERVIEW
2.00˝ 3´.00˝
Note: Unit requires M12 mating connector p/n# 611C175-03
(standard 3 foot length) – see below.