Flytec Alti Windwatch - Manual (Page 10)

8
Altimeter Altimeter
Main menu Set mode
Setting the altitude
Holding down the
●
▼ key (3 seconds) will
change from the main menu to Set mode.
The altitude display and the QNH flash
(current air pressure in hPa (1 hPa = 1 mbar),
calculated back to sea-level). The
●
▼ key can
be used to reduce the values and the ●
▲ key to
increase it. Either press the key briefly to alter
the value in 1-metre increments or hold it
down continuously for fast resetting.
Save your entry by pressing both keys
●
▼
● ▲
simultaneously or wait 8 seconds; the display
will change from Set mode to the main menu.
Altitude
QNH
Main menu
The Altitude main menu displays the current
altitude above sea level, the temperature and
the time. The resolution of the altitude
display is 1 meter (3 feet). Normally, the alti-
tude is remeasured every 10 seconds. Each
press of a key results in a faster measuring
mode (1 second). If the change in alti-
tude exceeds 1 meter per second, the update
rate automatically changes to the faster
measuring mode (1 second). If the change in
altitude is lower, the update rate changes
back to every 10 seconds.
Briefly pressing the
●
▲ key will change the unit
of altitude (meters or feet).
Altitude
Time
Temperature