iPazzPort KP-810-18BV - Manual (Page 13)

10.3.Hold the voice button on the Commander keyboard for about 5
Seconds, until the LED and orange LED flash alternately, then
release the button. When “iPazzPortvoice ” icon appears on Smart
phone/tablet , click thr “iPazzPortvoice ” icon for connection. At
first, thefourth LED flashes quickly, after about 3 seconds, the LED
flashes
slowly, this means the connecting is successful.
Second connection
10.4.Turn on the Commander keyboard, hold voice button for 3 seconds
on the keyboard until the fourth LED lights, then release it, the
fourth LED flashes quickly, after about 3 seconds, the LED flash
slowly, and that means the connecting is successful.
Figure 7 Figure 8