Chatsworth Products Z4-Series SeismicFrame® Cabinet System - Manual (Page 18)

18
Removing
and
Installing
the
Rear
Doors
Removing
the
Rear
Doors:
1. With
the
doors
closed,
lift
and
remove
the
hinge
pins
from
both
the
upper
and
lower
hinges
on
the
door
that
you
want
to
remove.
2. Partially
open
the
door,
but
not
as
far
as
90
degrees.
3. Disconnect
the
ground
wire.
4. Open
the
door
to
exactly
90
degrees
and
pull
the
door
away
from
the
cabinet
frame.
Installing
the
Rear
Doors:
1. Hold
the
door
in
a
90
degree
open
position.
2. Align
the
hinges
on
the
door
with
the
hinges
on
the
frame
and
slide
the
hinges
together.
3. Rotate
the
door
to
the
closed
position.
4. Insert
the
hinge
pins
(from
the
top
of
the
hinge)
into
both
the
upper
and
lower
door
hinges.
5.
Open
the
door
and
reconnect
the
ground
wire.