Campbell Scientific LoggerLink Mobile App for Android - Manual (Page 3)

Introduction
Please read the End User License Agreement (EULA) .
LoggerLink for Android™ is a simple yet powerful tool that lets
you communicate directly with your IP-enabled or Bluetooth-
enabled CR3000, CR1000, CR800-Series, and CR200-Series
dataloggers from your Android device. The app lets you
perform field maintenance tasks such as viewing and collecting
data, setting the clock, and downloading programs.
Requirements
LoggerLink for Android runs on Android 2.2 or greater.
Bluetooth communication requires Android 4.0.3 (Ice Cream
Sandwich) or greater.
Getting Started
When LoggerLink is launched, you can add new dataloggers by
tapping the “+” button in the upper right corner of the screen.
Note that to use a TCP connection, your Android device must be
connected to a network through which you can reach your
datalogger. To use a Bluetooth connection, you must have an
RS-232 to Bluetooth adapter connected to your datalogger’s
RS-232 port.
Some LoggerLink functions are accessed from your Android
device’s Menu button. If your device does not have a Menu
TOC 1