Campbell Scientific LoggerLink Mobile App for Android - Manual (Page 9)

Datalogger Setup—Settings
TCP Settings
Address
The TCP/IP Address of the device you will be
communicating with.
Port
The TCP/IP Port the device is accepting connections on.
This defaults to 6785.
Bluetooth Settings
Note that the Bluetooth Name and Address must be selected
from the list that LoggerLink returns after searching for
Bluetooth devices. They cannot be entered manually.
Name
The Name of the Bluetooth device you will be
communicating with.
Address
The Bluetooth Address of the device you will be
communicating with.
Datalogger Settings
Type
The Type of the datalogger you will be communicating
with.
TOC 7