Campbell Scientific PakBus Networking Guide - Manual (Page 15)

PakBus Networking Guide
4.2 CR200 Series Datalogger
The CR200 Series dataloggers are programmed using the CRBasic editor.
However, unlike other CRBasic dataloggers, the CR200 Series has limited
memory and requires the datalogger program to be compiled before it is sent to
the datalogger. Additionally, the CR200 Series datalogger can only act as a
leaf node in a PakBus network.
The PakBus settings in the CR200 Series datalogger are entered using the
Device Configuration Utility.
11