Campbell Scientific PC208 Datalogger Support Software - Manual (Page 87)

SECTION 5. TELCOM
5-13
5.6 WAKETIME
WAKETIME.COM may be used to manually set
the wake up time on the PC201 card. The
wake up time programmed will be the next time
that the PC201 card will have the PC203 wake
up the PC for an unattended task. This
program will not work unless a PC201 card is
installed in the computer.
To run WAKETIME, type 'WAKETIME' on the
DOS command line and press Enter. The
program will display the wake up time currently
programmed into the PC201 and ask for a new
time. If return is entered without entering a new
date and time, then the wake up time will not be
changed. If it is desired to change the time,
then enter a new date and time and press enter.
The new wake up time will be displayed and the
computer will return to the PC-DOS system.
WAKETIME will display the date according to
the DOS country code in the PC.