Campbell Scientific PST3/PST8 Pump and Slug Test System User Manual
Campbell Scientific Pumps
Advertising
Table of contents
Document Outline
- Revision and Copyright Information
- Warranty and Assistance
- SECTION 1. HARDWARE
- SECTION 2. SOFTWARE
- 2.1 DATALOGGER SOFTWARE
- 2.2 PC SOFTWARE
- 2.2.2 PCPST - PST SUPPORT SOFTWARE
- 2.2.3 STANDARD INSTALLATION OF PCPST AND PC208 ON YOUR COMPUTER
- 2.2.4 QUICK START-UP PROCEDURE
- 2.2.5 PCPST OPERATIONS
- 2.2.6 MAIN MENU OPTIONS
- 2.2.7 UTILITIES MENU OPTIONS
- A. Select communications port
- B. Back up WELL.DAT and converted data to another drive
- C. Set PST date and time using computer date and time
- D. Check PST battery voltage
- E. Convert WELL.DAT elapsed time data to .PRN analysis software format
- F. Convert WELL.DAT to .RPT and .PRN files
- G. Erase all data from storage module
- H. Erase all data from PST
- I. Get data from storage module to WELL.DAT
- SECTION 3. STEP BY STEP PROCEDURE FOR A PUMP OR SLUG TEST
- SECTION 4. TECHNICAL DETAILS - HARDWARE
- SECTION 5. TECHNICAL DETAILS - SOFTWARE