Introduction, Cautionary statements, Initial inspection – Campbell Scientific SC115 CS I/O 2G Flash Memory Drive with USB Interface User Manual

Page 7: Quickstart

Advertising
background image

SC115 CS I/O 2G Flash Memory Drive
with USB Interface

1. Introduction

The SC115 is a portable 2-GB memory drive (thumb drive) compatible with
Campbell Scientific CRBasic dataloggers that have a CS I/O port. It shuttles
data, OS, and program files between Campbell Scientific dataloggers and a PC,
or it remains connected to the datalogger to augment data memory. It can be
used in tandem with a CompactFlash (CF) card.

The SC115 can also be used as a CS I/O to USB communications interface.

2. Cautionary Statements

• Corruption of multiple data files may occur if the SC115 is removed from

the host datalogger or PC during data transfer.

• Do not disconnect the SC115 from the host while the LED is flashing or

lit. Always use the Safely Remove Hardware utility provided in the
Windows operating system prior to removal from a PC.

• Some data collection modes increase the risk of inadvertently

disconnecting the SC115 from the datalogger during data transfer. See
Section 12.1, Preventing Data Corruption to assess the risk in a particular
application.

• Always click Disconnect in the datalogger support software prior to

removing the SC115 when it is a communications interface. See Section
11, Serial Communications Interface Function for communication
interface details and precautions.

3. Initial Inspection

Upon receipt of the SC115, inspect the packaging and contents for damage.
File damage claims with the shipping company. Immediately check package
contents against the shipping documentation. Contact Campbell Scientific
concerning discrepancies.

4. Quickstart

The primary function of the SC115 is as a portable memory drive (thumb
drive) to collect data from compatible Campbell Scientific dataloggers (see
Section 6, Specifications for compatibility). Simply connect the CS I/O
connector of the SC115 to the CS I/O connector of a properly programmed
datalogger, and data are transferred automatically.

Memory drive setup (see Section 7, Setup for complete instructions):

• SC115 — shipped from the factory ready for use in most applications.

1

Advertising