Campbell Scientific SC115 CS I/O 2G Flash Memory Drive with USB Interface - Manual (Page 9)

SC115 CS I/O 2G Flash Memory Drive with USB Interface
5.2 Communications Interface Function
As a communication device, the SC115 provides pass-through
communications.
6. Specifications
Features
• Portable 2-GB memory drive
• Shuttles data, OS, and program files or remains connected to
datalogger to augment memory
• Can be used as a CS I/O to USB communications interface
• Mean time between failure (MTBF): >1,000,000 hrs
• Sealed, over-moulded case. No serviceable parts.
Compatibility
Dataloggers: CR800
/ 850
CR1000, CR3000
CR5000, CR9000X
Temperature
Operating: -25°
to 50°C
Power requirement
Source:
12 Vdc from datalogger via SC12 cable,
or 5 Vdc through PC USB port
Load
Inactive:
200 µA
Active: 35 mA
Memory
Capacity: 2
GB
Media: Flash
Weight: 0.64 kg (0.14 lbs)
Dimensions: 105 x 43 x 21 mm (4.2 x 1.7 x 0.8 in)
7. Setup
A PC requires software drivers to support the SC115, and the datalogger
requires inclusion of specific code in its CRBasic program. In rare instances,
the SC115 may require a change to its default configuration through Campbell
Scientific’s Device Configuration Utility software v. 1.5 or higher
(DevConfig).
7.1 SC115 Settings (Optional)
The default SDC addressing in the SC115 is adequate for most applications.
For exceptional circumstances, the CS I/O SDC address can be altered using
the SC115 service in DevConfig v. 1.5 or higher (see Section 14.1, SDC
Addressing).
3