Campbell Scientific TX312 High Data Rate GOES Transmitter - Manual (Page 50)

Appendix D. RAWS-7 Data Format
D-2
D.4 RAWS-7 Sample Data
00.12 00.05 01.09 Rain fall: Hundredths of and inch
109 022 002 Wind Speed: Avg of last 10 minutes
234 123 087 Wind Direction: Avg of last 10 minutes
115 069 -23 Air Temperature: Sample
100 056 012 Relative Humidity: Avg of Last 10 minutes
056 098 012 Fuel Temperature: Sample
10.5 11.9 13.6 Battery Voltage: Sample
Oldest data in left column
Table D-1. RAWS-7 Output
Row
Number
Measurement
Format
1 Total Rain (hr) xx.xx
2 Wind Speed (10 min avg.) xxx
3 Wing Direction (10 min avg.) xxx
4 Air Temp (Sample) xxx
5 RH (10 min avg.) xxx
6 Fuel Temp (Sample) xxx
7 Battery Voltage (Sample) xx.x
Using P126 for RAWS-7 data format
P126 has three parameters. Parameter 2 “Data Format” is used to select the
desired data format.
1: Data Transfer to HDR GOES (P126)
1: 0000
Buffer Control
2: 0000 Data Format
3: 0000 Result Code Loc [ ______ ]
Parameter 2: Data Format
0
CSI Floating Point Binary
1 Floating Point ASCII
2 Binary Integer, 18 Bit
3 RAWS 7, Fire Weather
4 Fixed Decimal, ASCII, xxx.x
5 Fixed Decimal, ASCII, xx.xx
6 Fixed Decimal, ASCII, x.xxx
7 Fixed Decimal, ASCII, xxx
8 Fixed Decimal, ASCII, xxxxx