AT&T 2325/2365 - Manual (Page 53)

REMOTE ACCESS
50
Connect with the Answering System
You can access many features of this system remotely from a touch
tone phone.
1 Dial your telephone number.
2 When the system answers enter your Remote Access Code
(preset to 50). The system beeps twice and announces the
number of new messages on the system.
3 Within two seconds, enter a remote command (see “Remote
Access Commands”).
4 Press
* 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation.
Press
* 5 to hear the menu while remotely connected to the
answering system.
REMOTE ACCESS REMOTE ACCESS
REMOTE ACCESS COMMANDS
FUNCTION: COMMAND:
Play messages in Press the appropriate mailbox number
a mailbox (
1, 2, or 3). The system plays new
messages. If there are no new messages,
the system plays old messages.
Repeat a message Press
# 4 while message is playing; each
press backs up another message.
Skip a message Press
# 6 while message is playing; each
press advances another message.
Stop Press
# 5.
Save messages Hang up.
Delete message Press
# 9 while message is playing.
Review announcement Press
# 7; system plays announcement,
then beeps.