ArtDio IPC 1000 Series - Manual (Page 27)

ARTDio IPP 1000 Series
26
5-8 VoIP Calls Budget Control
IPP series units operate under the G.729AB protocol with voice packets of 40ms with each
voice line using a bandwidth of 12K bps. Thus with the full capacity of IPP series’ 12 lines, the
requirement would be 144 bps (for voice only, not including any other data flow). Therefore the
VoIP volume must be limited to accommodate your system’s bandwidth.
Setting the VoIP Calls Limit：
Select ‘ADVANCED \ NUMBERING PLAN’ on the Web Management Page
„ In the Access Codes section, enter the IP call limit in the ‘IP Calls’ field.
„ Click ‘Apply’