ArtDio IPC 1000 Series - Manual (Page 54)

ARTDio IPP 1000 Series
53
Section Item Field Description Default
Outgoing Call
Carrier Selection
(International) Access Code
Enter the international access code to be used for
outgoing international calls. Depends on the region
ID configured
Maximum The maximum entries of all international access
codes that could be dialed. (Read only) 10
Entered Display all codes that have been entered. (Read
only) Depends on the region
ID configured
Entries List List of all international access codes that could be
dialed. (Read only) Depends on the region
ID configured
Add Entries Add entries of all international access codes
allowed to be dialed. Four entries can be entered at
a time. None
All the access
codes could be
dialed
(International)
Delete Entries Delete entries of all international access codes
allowed to be dialed. Four entries can be entered at
a time. None
Outgoing Call
Carrier Selection
(Long Distance) Access Code The long distance access code to be inserted on
outgoing long distance calls. Depends on the region
ID configured
Maximum The maximum entries of all long distance access
codes allowed to be dialed. (Read only) 10
Entered Lists the codes that have been entered. (Read only) Depends on the region
ID configured
Entries List Lists all long distance access codes allowed to be
dialed. 0
Add Entries Add entries of all long distance access codes
allowed to be dialed. Four entries can be entered at
a time. None
All the access
codes could be
dialed
(Long Distance)
Delete Entries Delete entries of all long distance access codes
allowed to be dialed. Four entries can be entered at
a time. None
Maximum The maximum entries of all local calls that can be
dialed. (Read only) 10
Entered The local calls that have been entered. (Read only) 0
Entries List Lists all local codes that can be dialed. (Read only)
Add Entries Add the leading digits of phone number that are
not local call. For an outbound transit call, if the
first digits of phone number are matched with the
phone number, it will not be treated as local call. It
will be treated as a long distance call. None
Local Call
Exclusion
Delete Entries Delete an entry of local call exclusion. None
PBX CO Line
Access Codes PBX CO line access code, the code to access an
external phone line. If pause is required for 1-5
seconds, a character P can be added to the access
code. Each addition character P adds one second
to the pause. For example dialing 9PP, would
allow a 2 second pause. None
Manual IP
Learning Controls the function of Manual IP Learning.
Select ‘Enable’ or ‘Disable’
Click ‘Apply’ Enable