Alpine F1 STATUS PXI-H990 - Manual (Page 22)

Automatic Adjustments
18
- EN
1) In the Road Equalizer mode, press 1 ( ) or
5 ( ), select “R.EQ SETUP [Auto Road EQ
Setup]”, then press 2 (ENT).
2) Press 2 (ENT).
Measuring begins after a 10 second count-
down, so leave the car and close the door
within 10 seconds.
Measuring is canceled if 2 (ENT) is pressed
during measuring or during the countdown.
Measuring ends after about 8 minutes. After
measuring is complete, “COMPLETE” is
displayed, press 2 (ENT) to clear measuring
mode and press 6 (RTN).
• Press 6 (RTN) or RETURN on the remote control in
the setting mode to return to the previous item.
• “NO MIC ERR” is displayed when a microphone has
not been connected. Press 2 (ENT) to clear the
display.
B Measuring the Frequency Response Inside the Vehicle
○
○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Using the Road Equalizer function (continued)
R.EQ SETUP
START
After measuring is
complete, “Complete” is
displayed, press
ENTER to clear
measuring mode and
press RETURN.
• “NO MIC ERR” is
displayed when a
microphone has not been
connected. Press ENTER
to clear the display.