Alpine F1 STATUS PXI-H990 - Manual (Page 34)

30
- EN
Settings/Adjustments
13
Press 1 ( ) or 5 ( ), select “L or R” or “L+R”,
then press 2 (ENT).
L or R: Different adjustment values can be
set for the left and right channels.
L+R: Sets the same adjustment values for
the left and right channels.
When “L+R” is selected.
1) Press 1 ( ) or 5 ( ), select either the Lch
or Rch settings to validate and press
2 (ENT).
L->L+R: Make the present Lch settings
valid and set L/R with the same
adjustment values.
R->L+R: Make the present Rch settings
valid and set L/R with the same
adjustment values.
2) Press 6 (RTN).
14
Press 1 ( ) or 5 ( ), select “CH SELECT
[Channel Select]”, then press 2 (ENT).
15
Press 1 ( ) or 5 ( ), select the desired
channel, then press 2 (ENT).
The channels that can be selected are
different depending on the system setting
(page 9).
○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Performing time correction manually (Time Correction) (continued)
CH SELECT
Front TW Left
Front TW Right
Front WF Left
Front WF Right
Rear Left
Rear Right
Front Center
Subwoofer