Alpine F1 STATUS PXI-H990 - Manual (Page 89)

85
- EN
12
In Dolby PL II mode, press 1 ( ) or 5 ( ),
select “PANORAMA ON/OFF [Panorama
Mode ON/OFF]”, then press 2 (ENT).
13
Press 1 ( ) or 5 ( ) to switch ON/OFF, then
press 2 (ENT).
When set to “ON”, the stereo image of the
front channels expands to the surround
speakers. This creates a stimulating “envelop-
ing” effect with the acoustic image on the
sides.
14
Once the settings are completed, press and
hold F
• SETUP for at least 3 seconds.
• Press 6 (RTN) or RETURN on the remote control in
the setting mode to return to the previous item.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○
• To emphasize the surround effect (PANORAMA)
Dolby PL II
PANORAMA ON
The stereo image of the front channels expands to the surround speakers. This creates a stimulating
“enveloping” effect with the acoustic image on the sides.
Dolby PLII
Center Width
Dimension Control
Panorama Mode ON