ADC CRA-C - Manual (Page 42)

Configure and View Status
34 Megabit Modem CRA-C User Manual
Configure as a Router
Configure Router parameters at the Bridge/Router Menu. Router configuration
options are maintained and restored through the system's local service port and
are kept in NVRAM to be used in subsequent initializations.
1 Type 1 1
at the Bridge/Router Menu to display the
Bridge/Routing Configuration Menu.
07/02/97 PAIRGAIN TECHNOLOGIES 08:54:33
ATU-C ADSL MEGABIT MODEM TERMINAL 01.01
BRIDGE/ROUTING CONFIGURATION MENU
---------------------------------------------------------------
MODE SETTING 1. BRIDGE/ROUTER MODE ROUTER
IP STATIC ROUTING DESTINATION SUBNET MASK GATEWAY ADDRESS
TABLE 2. DEFAULT 192.168.240.1
3. 192.168.242.0 255.255.255.0 172.16.100.2
4. 0.0.0.0 0.0.0.0 0.0.0.0
5. 0.0.0.0 0.0.0.0 0.0.0.0
LAN PORT CONF. 6. LAN IP ADDR: 192.168.240.10
7. LAN SUBNET MASK: 255.255.255.0
LINE PORT CONF. 8. LINE IP ADDR: 172.16.100.1
9. LINE SUBNET MASK: 255.255.255.0
OTHER CONF. A. BOOT SERVER IP ADDR: 0.0.0.0
B. BOOT MODE: LOCAL
C. IMAGE FILE NAME:
D. IMAGE LOAD MODE: LOCAL
E. PACKET ENCAPSULATION: HDLC
---------------------------------------------------------------
C(o)nfirm (U)ndo (R)eturn (M)ain
ENTER CHOICE-->
2 Type 1 1 , press the spacebar to toggle to Router, then press
ENTER ENTER . At the prompt, Save current setting (Y/N) , type
Y to display the screen below. Ensure the mode setting is Router.
The following screen shows configuration for a Megabit Modem
CRA-C (ATU-C) routed toward a remote Megabit Modem CRA
(ATU-R), using IP addresses from the example in Figure 12.