ADC CRA-C - Manual (Page 46)

Configure and View Status
38 Megabit Modem CRA-C User Manual
Configure SNMP
Configure SNMP parameters and trap addresses at the SNMP
Configuration menu.
1 Type 2 2
at the Bridge/Router Menu to display the SNMP
Configuration Menu.
07 /0 2/9 7 PAIRG AIN T ECHNOLOGIES 08:53:26
AT U- C A DSL M EGABI T MODEM TERMINAL 01.01
SNMP CONFI GURATION MENU
-- -- --- -- --- -- --- ----- ----- ------------------------------------
S ET TIN GS 1. SNMP READ ONLY COMM STRING: public
2. SNMP READ WRITE COMM STRING: private
3. AUTHE NTICA TION TRAP STATUS: ENABLE
4. TRAP RECEI VER 1 IP ADDRESS: 0.0.0.0
5. TRAP RECEI VER 1 COMM STRING: public
6. TRAP RECEI VER 2 IP ADDRESS: 0.0.0.0
7. TRAP RECEI VER 2 COMM STRING: public
-- -- --- -- --- -- --- ----- ----- ------------------------------------
(C )onfi rm (U)ndo (R)eturn (M)ain
EN TE R C HO ICE -- >
2 Do the following for each SNMP Configuration option you want
to change:
_
Type the number of the option you want to configure.
_
Select, using the spacebar, or type in the appropriate
information for each option as indicated in Table 12 then
press
ENTER ENTER .