ADC CRA-C - Manual (Page 47)

Configure and View Status
Megabit Modem CRA-C User Manual 39
Table 12. SNMP Configuration Options
No. For Option Function
1 SNMP Read
Only Comm
String Provides the authentication string used for SNMP
read-only operations. At the prompt
NEW
COMMUNITY STRING: , type in appropriate
community string. Typically, use either Public or
Private. The read-only community string setting
must match the network manager community string
setting of Public or Private. The authentication
string is required for the Megabit Modem CRA-C to
correctly respond to SNMP set and get requests.
2 SNMP Read
Write Comm
String Provides the authentication string used for SNMP
read-write operations. At the prompt
NEW
COMMUNITY STRING: , type either Public (default)
or Private. The read-write community string setting
must match the network manager community string
setting of Public or Private. The authentication
string is required for the Megabit Modem CRA-C to
correctly respond to SNMP set and get requests
3 Authentication
Trap Status Select Disable (default) or Enable for use of
authentication error trap generation. The trap is
sent to the trap receiver address when an SNMP
request is received with an invalid or incorrect
community string.
4 Trap Receiver
1 IP Address Sets the first IP address for the server receiving
the trap.
5 Trap Receiver
1 Comm
String Enter the first string used for trap authentication is
entered. Trap Receiver 1 Community String is
blank if no trap is being used. The field is case
sensitive.
6 Trap Receiver
2 IP Address Enter the second IP address for the server receiving
the trap.
7 Trap Receiver
2 Comm
String Enter the second string used for trap authentication.
Trap Receiver 2 Community String is blank if no
trap is being used. The field is case sensitive